+ Reply to Thread
Page 1 of 2 1 2 LastLast
Results 1 to 30 of 45

Thread: what do you guys think ill put down....

  1. #1
    Burning Out ls1ssws6's Avatar
    Join Date
    Jan 2008
    Location
    philadelphia
    Posts
    365

    what do you guys think ill put down....

    i bought my car back in january and havent had a chance to get her to the dyno yet, was supossed to go to harris today (friday) but i had to get an emergency dentist apt...anyway i was really excited to see my numbers and now im bummed i will have to wait till they get another openeing....so im curious as to what you guys think ill put down...heres my mods

    01 trans am
    Slp flowpack with undercar ram air
    pacesetter longtubes
    tsp x pipe flowmaster single chambers
    ls6 ported heads with competition valve job
    comp 918s
    comp pushrods
    comp cam 224/230 581/589 114
    comp timing set
    PCM4less tune

    im hoping its over 400, im a n00b to the lsx cars so my number may be way off....lets hear what you guys have to say.....also what do you think about the 1/4mile?

  2. #2
    11.62@120 on a 100 shot OIF1VET's Avatar
    Join Date
    May 2007
    Location
    Muskegon, MI
    Age
    48
    Posts
    2,701
    I say you're in the ballpark with 400.. Depends on if you have an auto or stick too.. I have no headwork/ls1 heads and a smaller cam and put down 370 threw an A4.. 1/4 mile times will depend, M6, A4, what gears, etc. I just ran a 12.35 NA threw an A4 with no traction off the line, 3:73 gears, 3200 stall..
    U.S. Army 1983 - 2005
    MyLS1 Sprayers Club Member #1

  3. #3
    MyLS1.com Veteran Chris's Avatar
    Join Date
    May 2007
    Location
    MD
    Age
    30
    Posts
    1,894
    You put alot so far man, thats a good list of stuff, i'd say too about 375 to 400

  4. #4
    Burning Out ls1ssws6's Avatar
    Join Date
    Jan 2008
    Location
    philadelphia
    Posts
    365
    Quote Originally Posted by OIF1VET View Post
    I say you're in the ballpark with 400.. Depends on if you have an auto or stick too.. I have no headwork/ls1 heads and a smaller cam and put down 370 threw an A4.. 1/4 mile times will depend, M6, A4, what gears, etc. I just ran a 12.35 NA threw an A4 with no traction off the line, 3:73 gears, 3200 stall..
    yea i have an m6 with stock gears....i love the way it pulls im just curious, power adders will come later after i do suspension,rear and built tranyy....just curious

  5. #5
    Burning Out ls1ssws6's Avatar
    Join Date
    Jan 2008
    Location
    philadelphia
    Posts
    365
    Quote Originally Posted by Chris View Post
    You put alot so far man, thats a good list of stuff, i'd say too about 375 to 400
    thats just the beginning

  6. #6
    I Speed... So What? kissmyss00's Avatar
    Join Date
    Feb 2008
    Location
    North Carolina
    Posts
    876
    I'd say your going to be over 400hp.. whats going to be at the wheels will vary.... My z28 with similar rundown like yourself except for the exhaust banked 411rwhp.. my SS alone with minor bolt ons (no head/internal work...yet) hit 346rwhp...

    Best of luck to you man! Keep us posted.

    BTW bro..i got my zr1's back!

    Ryan

  7. #7
    Burning Out ls1ssws6's Avatar
    Join Date
    Jan 2008
    Location
    philadelphia
    Posts
    365
    Quote Originally Posted by kissmyss00 View Post
    I'd say your going to be over 400hp.. whats going to be at the wheels will vary.... My z28 with similar rundown like yourself except for the exhaust banked 411rwhp.. my SS alone with minor bolt ons (no head/internal work...yet) hit 346rwhp...

    Best of luck to you man! Keep us posted.

    BTW bro..i got my zr1's back!

    Ryan
    i will definetly keep you guys posted, ill be calling harris which is about a 15 minute drive from me and set up a dyno apt and ill post up my numbers and the sheet.....good job on your zr1s...got pictures?

  8. #8
    I Speed... So What? kissmyss00's Avatar
    Join Date
    Feb 2008
    Location
    North Carolina
    Posts
    876
    Quote Originally Posted by ls1ssws6 View Post
    good job on your zr1s...got pictures?
    I do.. Ive got a thread in the wheels etc. section. Im in the process of posting the pictures.

    Ryan

  9. #9
    MyLS1.com Superstud 01fbtaws6's Avatar
    Join Date
    May 2007
    Location
    Cedar Rapids, IA
    Age
    26
    Posts
    441
    im gonna say 415 at the rear wheels on the conservative side.

    Nitrous is like a hot girl with an STD,you want to hit it but you are afraid of the consequences


    Current Mods : Girlfriend
    Future Mods : An eight ball and a hooker!


    BLOWERS WHINE; TURBOS SUCK; NITROUS RULES!

    Ls1Tech Banned Wagon Member #1

  10. #10
    SuperMod ColeTrain's'C5's Avatar
    Join Date
    May 2007
    Location
    P-Town, MN
    Age
    26
    Posts
    2,149
    mine with mods below made only 391 but is REAL strong and it's consistant. Made the most power when the car was the hottest(after 4-5 pulls) I'd say around 400. The cam is close to mine and the one thing you have over mine is the heads(mine are just stock 243's w/ some polishing) When's the dyno day again? i maybe just missed it when i was reading
    Cole Angrimson~ '98 Corvette Coupe black, 6 speed, Targa, LS6 Z06 Heads,TSP 228R cam, ASP underdrive pulley, LS6 intake & T/B, TSP Long Tubes w/ O/R X-pipe thru B&B exhaust, K&N intake, B&M Short Shifter, Doug Rippie Tune. 409rwhp/403rwtq
    ***Corvette 1%'er***

  11. #11
    Burning Out ls1ssws6's Avatar
    Join Date
    Jan 2008
    Location
    philadelphia
    Posts
    365
    Quote Originally Posted by kissmyss00 View Post
    I do.. Ive got a thread in the wheels etc. section. Im in the process of posting the pictures.

    Ryan
    goin right now.....

    Quote Originally Posted by ColeTrain's'C5 View Post
    mine with mods below made only 391 but is REAL strong and it's consistant. Made the most power when the car was the hottest(after 4-5 pulls) I'd say around 400. The cam is close to mine and the one thing you have over mine is the heads(mine are just stock 243's w/ some polishing) When's the dyno day again? i maybe just missed it when i was reading
    yea you have a nice set up

    my car pulls hard as crap (read my post in the kill section lol) but i just want to know the number for shits and giggle (my first dyno im excited) I had a dyno apt. set up for this past friday but had to cancel cause i had to make an emergency dentist apt...but im gonna call tomorrow and try to set something up again.....also i have an ls6 intake i forgot to mention

  12. #12
    DEAD
    Join Date
    May 2007
    Posts
    7,004
    My guess is around 370 or 380. My formula is take the number you are expecting and wanting to see and then minus 30 or 40

  13. #13
    Burning Out ls1ssws6's Avatar
    Join Date
    Jan 2008
    Location
    philadelphia
    Posts
    365
    Quote Originally Posted by dixonk View Post
    My guess is around 370 or 380. My formula is take the number you are expecting and wanting to see and then minus 30 or 40
    hey thanks for the boost in confidence lol i mean to me its just a number that ill have to double thats all it doesnt really make a difference cause i know how fast it is and how hard she pulls

  14. #14
    DEAD
    Join Date
    May 2007
    Posts
    7,004
    I am just speaking from experience. Cars are defenitly bitches and do the opposite of what you want most the time.

  15. #15
    SuperMod ColeTrain's'C5's Avatar
    Join Date
    May 2007
    Location
    P-Town, MN
    Age
    26
    Posts
    2,149
    Amen to that^^^ although i was hoping for 400 or slightly over and got 391. So i wasn't too far off
    Cole Angrimson~ '98 Corvette Coupe black, 6 speed, Targa, LS6 Z06 Heads,TSP 228R cam, ASP underdrive pulley, LS6 intake & T/B, TSP Long Tubes w/ O/R X-pipe thru B&B exhaust, K&N intake, B&M Short Shifter, Doug Rippie Tune. 409rwhp/403rwtq
    ***Corvette 1%'er***

  16. #16
    Registered User
    Join Date
    Oct 2007
    Location
    Regina, Saskatchewan Canada
    Age
    27
    Posts
    28
    And they don't always run right on the dyno.
    2001 Camaro Z28 - 365 HP/409 lbs/ft, 6-Speed, stock heads and cam, 3225 lbs

  17. #17
    I Speed... So What? kissmyss00's Avatar
    Join Date
    Feb 2008
    Location
    North Carolina
    Posts
    876
    Quote Originally Posted by dixonk View Post
    I am just speaking from experience. Cars are defenitly bitches and do the opposite of what you want most the time.
    I hoped for over 100006rwhp, considering i blew my savings on a crap load of bottled hopes and dreams ... boo false advertising!!! Hahaha..

    Def. a true statement kevin. I was banging for 360 even on mine but got 14 less..

    Ryan

  18. #18
    Burning Out ls1ssws6's Avatar
    Join Date
    Jan 2008
    Location
    philadelphia
    Posts
    365
    Quote Originally Posted by dixonk View Post
    I am just speaking from experience. Cars are defenitly bitches and do the opposite of what you want most the time.
    im not doubting you man, i know your probably right im hoping for 400 ill probably pull like a 340 then id really be pissed....oh well dyno is only a number, the pedal and how much your ass goes back in the seat is all that matters when it comes down to it

  19. #19
    11.62@120 on a 100 shot OIF1VET's Avatar
    Join Date
    May 2007
    Location
    Muskegon, MI
    Age
    48
    Posts
    2,701
    Quote Originally Posted by ls1ssws6 View Post
    im not doubting you man, i know your probably right im hoping for 400 ill probably pull like a 340 then id really be pissed....oh well dyno is only a number, the pedal and how much your ass goes back in the seat is all that matters when it comes down to it

    Exactly.. Dyno numbers are nice to know, but how your car performs is more important to me.. I only put down 370 rwhp NA and was able to run a 12.35 in the 1/4 on a shit track. On a well prepped track I think I'll see 11.90's all day on just the motor..
    U.S. Army 1983 - 2005
    MyLS1 Sprayers Club Member #1

  20. #20
    Burning Out ls1ssws6's Avatar
    Join Date
    Jan 2008
    Location
    philadelphia
    Posts
    365
    Quote Originally Posted by OIF1VET View Post
    Exactly.. Dyno numbers are nice to know, but how your car performs is more important to me.. I only put down 370 rwhp NA and was able to run a 12.35 in the 1/4 on a shit track. On a well prepped track I think I'll see 11.90's all day on just the motor..
    not too shabby at all......yea i cant wait to get to a track, i thought i shifty poorly, but last night during my srt-4 showdown after all was said and done my dad was like "damn you can shift" meant a lot comin from a guy who has been racing/modding/cruising hot rods for years

  21. #21
    DEAD
    Join Date
    May 2007
    Posts
    7,004
    When are you heading to the dyno. We should put some cash on this one

  22. #22
    Burning Out ls1ssws6's Avatar
    Join Date
    Jan 2008
    Location
    philadelphia
    Posts
    365
    Quote Originally Posted by dixonk View Post
    When are you heading to the dyno. We should put some cash on this one
    june 20th...put your money where your mouth is chump

  23. #23
    DEAD
    Join Date
    May 2007
    Posts
    7,004
    Damn man I might forget by then. Why so long?

  24. #24
    Burning Out ls1ssws6's Avatar
    Join Date
    Jan 2008
    Location
    philadelphia
    Posts
    365
    Quote Originally Posted by dixonk View Post
    Damn man I might forget by then. Why so long?
    i set it up at harris, they are really busy....ill remind you

  25. #25
    DEAD
    Join Date
    May 2007
    Posts
    7,004
    I guess things operate different in the states. Jassim's dyno here man sometimes we are pushing 10 cars a day through that thing and leave out of there at 4 in the morning.

  26. #26
    Burning Out ls1ssws6's Avatar
    Join Date
    Jan 2008
    Location
    philadelphia
    Posts
    365
    Quote Originally Posted by dixonk View Post
    I guess things operate different in the states. Jassim's dyno here man sometimes we are pushing 10 cars a day through that thing and leave out of there at 4 in the morning.
    damn....yea here i guess they get some many different cars and do different things they have to set up apts far ahead....i wish i could get in sooner but no biggie, ill wait till next friday

  27. #27
    DEAD
    Join Date
    May 2007
    Posts
    7,004
    Shit hopefully I will be going to the dyno tomorrow or the following day.

  28. #28
    Burning Out ls1ssws6's Avatar
    Join Date
    Jan 2008
    Location
    philadelphia
    Posts
    365
    Quote Originally Posted by dixonk View Post
    Shit hopefully I will be going to the dyno tomorrow or the following day.
    fuck you haha i have to wait another 8 days

  29. #29
    Burning Out ls1ssws6's Avatar
    Join Date
    Jan 2008
    Location
    philadelphia
    Posts
    365
    aight kevin...tomorrows the big day, you still wana throw some money on it I accept paypal

  30. #30
    DEAD
    Join Date
    May 2007
    Posts
    7,004
    Haha wish I could bro. Credit card expired this month and still waiting on my replacement We can do a virtual bet with the gifts. I will bet you a keg of beer.

+ Reply to Thread
Page 1 of 2 1 2 LastLast

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts

diecast cars | Porsche 918 Spyder | Ford GT | camaro parts | used ford trucks | chevy impala | crown vic forums
2010 mustang wheels | used chevy trucks | mustang performance parts | american muscle cars | chevy c10 truck forums
cheap nos chevelle parts | used corvettes | used camaros | discount car insurance quotes | cars under $1000 | corvette for sale

LSX Chevy Camaro & Corvette, Pontiac GTO & Firebird, & GM Trucks - LS1 Forum